CO. ΠΛΈΓΜΑΤΟΣ ΚΑΛΩΔΊΩΝ HEBEI REKING, ΕΠΕ
Πλέγμα εκτύπωσης οθόνης & πλέγμα φίλτρων με το ανοξείδωτο, τον πολυεστέρα και το νάυλον υλικό εκτύπωσης Material.Screen
CO. ΠΛΈΓΜΑΤΟΣ ΚΑΛΩΔΊΩΝ HEBEI REKING, ΕΠΕ
Πλέγμα εκτύπωσης οθόνης & πλέγμα φίλτρων με το ανοξείδωτο, τον πολυεστέρα και το νάυλον υλικό εκτύπωσης Material.Screen
|
Λεπτομέρειες:
Πληρωμής & Αποστολής Όροι:
|
Υλικό: | ανοξείδωτο 316 | πλάτος: | σαν απαίτηση |
---|---|---|---|
μήκος: | σαν απαίτηση | Χρώμα: | Ασήμι |
Appication: | φίλτρο | Ύφος ύφανσης: | Σαφής ύφανση |
Μορφή: | Κύκλος, τετράγωνο, ή όπως απαιτεί | όνομα προϊόντων: | Συμπυκνωμένο πλέγμα |
Υψηλό φως: | sintered stainless steel sheet,sintered metal disc |
500 micron ultra fine stainless steel porous sintered knitted Wire Mesh screen
Description of stainless steel sintered mesh round for filter plate
5-layer sintered stainless steel mesh
It is our standard sintered mesh structure. A single layer of fine wire mesh was placed between two thicker square woven meshes, which were then added to two layers of strong Dutch woven wire mesh and sintered together to form a sturdy board. A single layer of fine wire mesh acts as a filter layer that can be customized to meet specific filtration levels, ranging from 5 microns to 300 microns. It can then be cut and made into a variety of discs, tubes, cartridges and plates.
Filter sintered mesh material
AISI304, AISI304L; AISI316; AISI316L >>Check chemical composition
Special alloy steel Hastelloy, Monel, Inconel and Titanium alloy can be customized according to customer requirements
Filter size
Standard sizes: 500x1000mm, 600x1200mm and 1000x1000mm, 1200x1200mm, and other sizes.
Filtering technology expression
Initial bubble point pressure
The bubble is the minimum pressure required to force the gas to impregnate the porous material Pa through the liquid.
Average aperture
The average pore size as determined by the foam principle, in μm.
Relative permeability coefficient
Unit differential pressure, fluid volume flows through the filter element per unit area, the unit is L / min.cm2.Pa.
Viscous permeability coefficient
Dynamic Viscosity Unit of Fluid When the fluid resistance is formed only by viscous losses, the unit pressure gradient, volume flow rate through the filter element per unit area in m2.
Note: This list for a reference, not for the complete list.
Nomin al filter rating |
structure prodextive layer+control layer +dispersion layer+ reinforce layer+ reinforce layer |
Thickness(mm) | air perm eabilit | Bubble pressure(mm) | weight (kg/m2) |
porosity (%) |
1 | 100+400*2800+100+12*64+64 | 1.7 | 1.81 | 360-600 | 5 layer 8.4 | 40% |
5 | 100+200*1400+100+12*64+64 | 1.7 | 2.42 | 260-550 | 6 layer 14.4 | 40% |
20 | 100+165*800+100+12*64+64* | 1.7 | 4.5 | 170-450 | 40% | |
200 | 40+80+40+20+40+80+40 | 2 | 26 | 50-150 | 40% |
Υπεύθυνος Επικοινωνίας: Gerry Cui
Τηλ.:: +8613333017371
Υψηλή ακρίβεια 635 πλέγμα 304 πλέγμα εκτύπωσης οθόνης ανοξείδωτου
Χαμηλός cOem υφασμάτων πλέγματος καλωδίων ανοξείδωτου Elongatation/ODM αποδεκτοί
Υφαντικό Monofilament πλέγμα εκτύπωσης οθόνης πολυεστέρα
Πλέγμα εκτύπωσης οθόνης πολυεστέρα 200 πλέγματος για το PCB
Χαμηλό πλέγμα εκτύπωσης οθόνης πολυεστέρα ελαστικότητας για την υγρή επίδειξη κρυστάλλου
Υψηλή ένταση 110 πλέγμα εκτύπωσης οθόνης
Επαγγελματικό 110 Monofilament ύφασμα αμπαρώματος πλέγματος πολυεστέρα για την εκτύπωση οθόνης